80 H Error CodeUpdated 4 months ago

🔍 What does 80H mean?

When your scooter shows Error Code 80H, it indicates:

The system temperature is too high, and protection mode has been activated

In simple terms:
👉 The scooter is limiting or stopping operation to prevent damage

⚠️ Common Causes

This issue is usually caused by:

1. High load riding
   • Continuous high-speed riding
   • Long uphill rides
   • Heavy rider or extra load
2. High ambient temperature
   • Riding in hot weather
   • Using the scooter after sun exposure
3. Poor heat dissipation
   • Controller overheating
   • Low-speed, high-torque riding
4. Frequent hard acceleration or braking
   • Causes high current output

🛠️ Troubleshooting Steps

✅ Step 1: Stop riding immediately

• Turn off the scooter
• Move it to a cool and shaded area

✅ Step 2: Allow it to cool down

• Wait 20–30 minutes
  👉 In most cases, it will return to normal after cooling

✅ Step 3: Restart the scooter

• Turn it back on after cooling
• Check if the error disappears

✅ Step 4: Review usage conditions

Check if:

• You were riding in hot weather
• Riding at full speed for long periods
• Climbing hills continuously

📹 Information Required (if issue persists)

Please provide:

• A video showing the 80H error
• Description of usage conditions
• Order number + Frame number (right side of the footboard)

🔧 Solution

In most cases, no repair is needed. This is a normal protection feature.

If it happens frequently, we will assist with:

• Controller inspection
• Heat dissipation check
• Controller replacement if necessary

❗ Notes

• Avoid prolonged full-speed riding
• Avoid continuous use in high temperatures
• Allow the scooter to cool down between rides
• Do not use immediately after sun exposure