Setting up your new Tiger EVO electric scooter correctly is the single most important step for your safety. This process is also available in video format:. Open the Box: Use a box cutter or knife to open the box and fold open the top. Check Contents

Setting up your new Tiger EVO electric scooter correctly is the single most important step for your safety. This process is also available in video format:<iframe width="100%" src="https://www.youtube.com/embed/JBlBuy-Cv7I??si=73rJr_tcqmc8A8gQ&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable">&#xA0;&#xA0;&#xA0;&#xA0;&#xA0;&#xA0;&#xA0;</iframe><h3 id="isPasted">&#x1F381; Unboxing Your Scooter</h3><ol start="1" id="isPasted"><li>Open the Box: Use a box cutter or knife to open the box and fold open the top.</li><li>Check Contents: Inside, you should see protective styrofoam along with the following items. Contact the support team immediately if any are missing:<ul style="list-style-type: disc;"><li>Tiger EVO electric scooter</li><li>Display introduction and Tiger EVO user&apos;s manual</li><li>Protection*2</li><li>Rubber Screw Cover*2 For All Models</li><li>Allen Key Set</li><li id="isPasted">Charger and cable</li></ul></li><li>Remove Scooter: With the help of someone, remove the scooter from the box and place it on a flat surface. Using a stool or bench is recommended so the wheels can spin freely.</li><li>Remove Protective Material: Carefully remove the protective material from the scooter and set it aside. You should keep both the styrofoam and the box in case you need to ship your scooter back. Otherwise, recycle the materials.</li></ol><hr><h3 id="isPasted">&#x1F6F4; Assembly Steps</h3><h4 id="1unfolding">1.Unfolding</h4><ol start="1" id="isPasted"><li>Unhook: Ensure the hook is not clipped into the rear foot rest. If it is, push down on the stem and unhook it from the rear foot rest.</li><li>Unfold Stem: Unfold the stem by pulling it up to a completely vertical position.</li><li>Lock Latch: Locate the folding latch and bring it up, locking the stem. This will require some force to lock fully upright.</li><li>Engage Safety Button: Make sure the safety button of the folding mechanism is clipped into the stem.&#xA0;</li></ol>&#x26A0;&#xFE0F; WARNING: Always ensure the safety button of the folding mechanism is clipped into the scooter stem and the stem is fully secured before riding. Failure to do so can lead to loss of control, serious injuries, and death. Do not operate the scooter if you notice anything wrong with the stem, safety button, or locking mechanism.<h4 id="isPasted">2. Attach Handlebar</h4><ol start="1"><li>Connect Cables: Remove the four hex screws from the handlebar. Connect the male connection cable coming out of the handlebar into the female cable coming out of the front stem. Make sure the pins are aligned. Be careful not to damage the cable.</li><li>Insert and Tighten: Insert the handlebar at the top of the front stem and tighten it into place with the four hex screws provided.</li><li>Adjust and Tighten Controls: The latches and buttons on your handlebar may be loose to avoid shipping damage.</li></ol>

Hiley Tiger EVO Unboxing

Open the Box: Use a box cutter or knife to open the box and fold open the top. Check Contents: Inside, you should see protective styrofoam along with the following items. Contact the support team immediately if any are missing:. Tiger EVO electric sc

<h3 id="setting-up-your-new-hiley-tiger-evo-gtr-electric-scooter-correctly-is-the-single-most-important-step-for-your-safety-this-process-is-also-available-in-video-format">Setting up your new Hiley Tiger EVO GTR electric scooter correctly is the single most important step for your safety. This process is also available in video format:</h3><iframe width="100%" src="https://www.youtube.com/embed/ilbzCjjydOY?&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable"></iframe> <h3 id="isPasted">&#x1F381; Unboxing Your Scooter</h3><ol start="1"><li>Open the Box: Use a box cutter or knife to open the box and fold open the top.</li><li>Check Contents: Inside, you should see protective styrofoam along with the following items. Contact the support team immediately if any are missing:<ul style="list-style-type: disc;"><li>Tiger EVO electric scooter</li><li>Display introduction and Tiger EVO user&apos;s manual</li><li>Protection*2</li><li>Rubber Screw Cover*2 For All Models</li><li>Allen Key Set</li><li>Charger and cable</li></ul></li><li>Remove Scooter: With the help of someone, remove the scooter from the box and place it on a flat surface. Using a stool or bench is recommended so the wheels can spin freely.</li><li>Remove Protective Material: Carefully remove the protective material from the scooter and set it aside. You should keep both the styrofoam and the box in case you need to ship your scooter back. Otherwise, recycle the materials.</li></ol><hr><h3 id="-assembly-steps">&#x1F6F4; Assembly Steps</h3><h4 id="1unfolding">1.Unfolding</h4><ol start="1"><li>Unhook: Ensure the hook is not clipped into the rear foot rest. If it is, push down on the stem and unhook it from the rear foot rest.</li><li>Unfold Stem: Unfold the stem by pulling it up to a completely vertical position.</li><li>Lock Latch: Locate the folding latch and bring it up, locking the stem. This will require some force to lock fully upright.</li><li>Engage Safety Button: Make sure the safety button of the folding mechanism is clipped into the stem.&#xA0;</li></ol>&#x26A0;&#xFE0F; WARNING: Always ensure the safety button of the folding mechanism is clipped into the scooter stem and the stem is fully secured before riding. Failure to do so can lead to loss of control, serious injuries, and death. Do not operate the scooter if you notice anything wrong with the stem, safety button, or locking mechanism.<h4 id="2-attach-handlebar">2. Attach Handlebar</h4><ol start="1"><li>Connect Cables: Remove the four hex screws from the handlebar. Connect the male connection cable coming out of the handlebar into the female cable coming out of the front stem. Make sure the pins are aligned. Be careful not to damage the cable.</li><li>Insert and Tighten: Insert the handlebar at the top of the front stem and tighten it into place with the four hex screws provided.</li><li>Adjust and Tighten Controls: The latches and buttons on your handlebar may be loose to avoid shipping damage.</li></ol>

Hiley Tiger EVO GTR Unboxing

<h3 id="setting-up-your-new-hiley-tiger-10-v5-electric-scooter-correctly-is-the-single-most-important-step-for-your-safety-this-process-is-also-available-in-video-format">Setting up your new Hiley Tiger 10 V5 electric scooter correctly is the single most important step for your safety. This process is also available in video format:</h3><iframe width="100%" src="https://www.youtube.com/embed/R8CPD5IOel4?&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable"></iframe> <h3 id="isPasted">&#x1F381; Unboxing Your Scooter</h3><ol start="1"><li>Open the Box: Use a box cutter or knife to open the box and fold open the top.</li><li>Check Contents: Inside, you should see protective styrofoam along with the following items. Contact the support team immediately if any are missing:<ul style="list-style-type: disc;"><li>Tiger EVO electric scooter</li><li>Display introduction and Tiger EVO user&apos;s manual</li><li>Protection*2</li><li>Rubber Screw Cover*4 For All Models</li><li>Allen Key Set</li><li>Charger and cable</li></ul></li><li>Remove Scooter: With the help of someone, remove the scooter from the box and place it on a flat surface. Using a stool or bench is recommended so the wheels can spin freely.</li><li>Remove Protective Material: Carefully remove the protective material from the scooter and set it aside. You should keep both the styrofoam and the box in case you need to ship your scooter back. Otherwise, recycle the materials.</li></ol><hr><h3 id="-assembly-steps">&#x1F6F4; Assembly Steps</h3><h4 id="1unfolding">1.Unfolding</h4><ol start="1"><li>Unhook: Ensure the hook is not clipped into the rear foot rest. If it is, push down on the stem and unhook it from the rear foot rest.</li><li>Unfold Stem: Unfold the stem by pulling it up to a completely vertical position.</li><li>Lock Latch: Locate the folding latch and bring it up, locking the stem. This will require some force to lock fully upright.</li><li>Engage Safety Button: Make sure the safety button of the folding mechanism is clipped into the stem.&#xA0;</li></ol>&#x26A0;&#xFE0F; WARNING: Always ensure the safety button of the folding mechanism is clipped into the scooter stem and the stem is fully secured before riding. Failure to do so can lead to loss of control, serious injuries, and death. Do not operate the scooter if you notice anything wrong with the stem, safety button, or locking mechanism.<h4 id="2-attach-handlebar">2. Attach Handlebar</h4><ol start="1"><li>Connect Cables: Remove the four hex screws from the handlebar. Connect the male connection cable coming out of the handlebar into the female cable coming out of the front stem. Make sure the pins are aligned. Be careful not to damage the cable.</li><li>Insert and Tighten: Insert the handlebar at the top of the front stem and tighten it into place with the four hex screws provided.</li><li>Adjust and Tighten Controls: The latches and buttons on your handlebar may be loose to avoid shipping damage.</li></ol>

Hiley Tiger 10 V5 Unboxing

<h3 id="setting-up-your-new-hiley-tiger-supraelectric-scooter-correctly-is-the-single-most-important-step-for-your-safety-this-process-is-also-available-in-video-format">Setting up your new Hiley Tiger Supra&#xA0;electric scooter correctly is the single most important step for your safety. This process is also available in video format:</h3><iframe width="100%" src="https://www.youtube.com/embed/XP9A-6hXooU?&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable"></iframe> <h3 id="isPasted">&#x1F381; Unboxing Your Scooter</h3><ol start="1"><li>Open the Box: Use a box cutter or knife to open the box and fold open the top.</li><li>Check Contents: Inside, you should see protective styrofoam along with the following items. Contact the support team immediately if any are missing:<ul style="list-style-type: disc;"><li>Tiger EVO electric scooter</li><li>Display introduction and Tiger EVO user&apos;s manual</li><li>Protection*2</li><li>Rubber Screw Cover*4 For All Models</li><li>Allen Key Set</li><li>Charger and cable</li></ul></li><li>Remove Scooter: With the help of someone, remove the scooter from the box and place it on a flat surface. Using a stool or bench is recommended so the wheels can spin freely.</li><li>Remove Protective Material: Carefully remove the protective material from the scooter and set it aside. You should keep both the styrofoam and the box in case you need to ship your scooter back. Otherwise, recycle the materials.</li></ol><hr><h3 id="-assembly-steps">&#x1F6F4; Assembly Steps</h3><h4 id="1unfolding">1.Unfolding</h4><ol start="1"><li>Unhook: Ensure the hook is not clipped into the rear foot rest. If it is, push down on the stem and unhook it from the rear foot rest.</li><li>Unfold Stem: Unfold the stem by pulling it up to a completely vertical position.</li><li>Lock Latch: Locate the folding latch and bring it up, locking the stem. This will require some force to lock fully upright.</li><li>Engage Safety Button: Make sure the safety button of the folding mechanism is clipped into the stem.&#xA0;</li></ol>&#x26A0;&#xFE0F; WARNING: Always ensure the safety button of the folding mechanism is clipped into the scooter stem and the stem is fully secured before riding. Failure to do so can lead to loss of control, serious injuries, and death. Do not operate the scooter if you notice anything wrong with the stem, safety button, or locking mechanism.<h4 id="2-attach-handlebar">2. Attach Handlebar</h4><ol start="1"><li>Connect Cables: Remove the four hex screws from the handlebar. Connect the male connection cable coming out of the handlebar into the female cable coming out of the front stem. Make sure the pins are aligned. Be careful not to damage the cable.</li><li>Insert and Tighten: Insert the handlebar at the top of the front stem and tighten it into place with the four hex screws provided.</li><li>Adjust and Tighten Controls: The latches and buttons on your handlebar may be loose to avoid shipping damage.</li></ol>

Hiley Tiger Supra Unboxing

<h3 id="setting-up-your-new-hiley-tiger-king-rs-electric-scooter-correctly-is-the-single-most-important-step-for-your-safety-this-process-is-also-available-in-video-format">Setting up your new Hiley Tiger King RS electric scooter correctly is the single most important step for your safety. This process is also available in video format:</h3><iframe width="100%" src="https://www.youtube.com/embed/u6qOz9E9XSk?&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable">&#xA0;&#xA0;</iframe><h3 id="isPasted">&#x1F381; Unboxing Your Scooter</h3><ol start="1"><li>Open the Box: Use a box cutter or knife to open the box and fold open the top.</li><li>Check Contents: Inside, you should see protective styrofoam along with the following items. Contact the support team immediately if any are missing:<ul style="list-style-type: disc;"><li>Tiger EVO electric scooter</li><li>Display introduction and Tiger EVO user&apos;s manual</li><li>Protection*2</li><li>Rubber Screw Cover*4 For All Models</li><li>Allen Key Set</li><li>Charger and cable</li><li>rear fender</li></ul></li><li>Remove Scooter: With the help of someone, remove the scooter from the box and place it on a flat surface. Using a stool or bench is recommended so the wheels can spin freely.</li><li>Remove Protective Material: Carefully remove the protective material from the scooter and set it aside. You should keep both the styrofoam and the box in case you need to ship your scooter back. Otherwise, recycle the materials.</li></ol><hr><h3 id="-assembly-steps">&#x1F6F4; Assembly Steps</h3><h4 id="1unfolding">1.Unfolding</h4><ol start="1"><li>Unhook: Ensure the hook is not clipped into the rear foot rest. If it is, push down on the stem and unhook it from the rear foot rest.</li><li>Unfold Stem: Unfold the stem by pulling it up to a completely vertical position.</li><li>Lock Latch: Locate the folding latch and bring it up, locking the stem. This will require some force to lock fully upright.</li><li>Engage Safety Button: Make sure the safety button of the folding mechanism is clipped into the stem.&#xA0;</li></ol>&#x26A0;&#xFE0F; WARNING: Always ensure the safety button of the folding mechanism is clipped into the scooter stem and the stem is fully secured before riding. Failure to do so can lead to loss of control, serious injuries, and death. Do not operate the scooter if you notice anything wrong with the stem, safety button, or locking mechanism.<h4 id="2-attach-handlebar">2. Attach Handlebar</h4><ol start="1"><li>Connect Cables: Remove the four hex screws from the handlebar. Connect the male connection cable coming out of the handlebar into the female cable coming out of the front stem. Make sure the pins are aligned. Be careful not to damage the cable.</li><li>Insert and Tighten: Insert the handlebar at the top of the front stem and tighten it into place with the four hex screws provided.</li><li>Adjust and Tighten Controls: The latches and buttons on your handlebar may be loose to avoid shipping damage.</li></ol>

Hiley Tiger King RS Unboxing

hileymobility

Unboxing and Setup

Getting Started

Do You Offer Free Shipping?

Can I Pick Up Myself?

How do I track my order?

How do I cancel my order?

What do I do if I receive the wrong item in my order?

How to Become a Reviewer?

FAQs

How to Replace Brake Pads?

How to Replace a Shock Absorber?

How to Replace the Wheel Hub and Motor?

How to Choose the Tire?

How to Change a Tire?

How to Choose the Correct Tire Pressure?

How to Replace the Controller?

How to Disable Kick to Start?

Core Riding Components

How to Replace the Battery Safely?

How to Replace the Fender?

How to Replace the Pin?

Loose Headset? Here's How to Fix

How to Maintain Your E-Scooter?

How to Unlock the Speed Limit?

Internal Electrical Components

How to Install Steering Damper?

How to Install an Adjustable Scooter Seat?

How to Eliminate Brake Noise?

How to Fix Headlight Flickering?

How to Set Riding Mode Parameters?

How to Exit Low Voltage Protection Mode?

How to Turn Off the Password Lock?

How to Replace the Dashboard?

How to Convert a Thumb Throttle to a Split Grip?

How to Replace the Brake Lever?

How to Activate Cruise Control?

How to Install the Extra Headlight?

How to Add a New NFC Card?

How to Set the Light Sensitivity?

How to Set the Over-temperature Protection Value?

How to Set a Startup Password on your Hiley Scooter?

How to Set the Correct Wheel Diameter?

How to Turn Off the Anti-Theft Function?

Interface Overview

Use Hiley's NFC card to unlock your scooter instantly

How to Switch Between Kilometers and Miles?

How to Set the Cruise Control Function?

The Menu Parameter Setting?

How to Activate the Electronic Alarm and Traction Control System?

How to Adjust the Screen Brightness?

How to Adjust the EABS Strength?

How to Set Up the Auto Headlight?

Why won’t my dashboard turn on?

Controls and External Hardware

Scooter Issues Solutions

Digital Manual Download

Manual Download

Payment, Orders & Shipping

First Ride Guide

First Ride

What's Included with Your Hiley Scooter

User Manual Overview

Initial Charging on Your HILEY Scooter

FAQs for New Rider

80 H Error Code

07H Error Code

4 0H Error Code

2 0H Error Code

0 8H Error Code

10 H Error Code

02H Error Code

01H Error Code

Error Codes

Troubleshooting

Fix Wheel Noise Issues

Controller Wiring Tutorial

How to Fix Headset Looseness on an Electric Scooter | Safe & Easy Repair

How to Fix Low Voltage Protection on an Electric Scooter | Quick and Easy Solution